Motorola Droid Razr XT912 or XT910 repair tutorial providing the details of disassemblying your Motorola Droid XT912/XT910. Aiming at helping people whose Motorola Razr XT912 or XT910 is broken and want to repair it by themselves,attached Motorola Droid Razr Take Apart video demonstrates how to take apart Motorola Driod Razr XT912 or Motorola Droid Razr XT910 into LCD assembly,front housing, middle plate, battery and battery door.
Tools needed: Safe Open Pry Tool, T4 Screwdriver, T3 Screwdriver
1. Use Safe Open Pry Tool to pry up the camera lens which is hold by double tape adhesive.
2. Remove the screw under the camera lens by using T3 screwdriver
3. Use the edge of Safe Open Pry Tool to left the battery door.
4. Use T3 screwdriver to remove 6 screws showed in the picture.
5. After release these 5 screws, the battery can be released.
6. Thrust the Safe Open Pry Tool into the gap between middle plate and LCD assembly to pry up the middle plate.
7. Remove the metal frame by unscrew 2 screws
8. Disconnect these 3 connectors then remove the front camera.
9. Pry out the bracket module
10 . Carefully left up the metal shield then disconnect 3 connectors beneath.
11. Separate the motherboard from the LCD assembly.
Watch the Video and learn how to disassemble your Droid Razr XT912 or XT910!
You can buy Motorola Driod Razr XT910 Replacement Parts at http://www.etradesupply.com/motorola/android-models/motorola-droid-razr-xt910.html
Driod Razr XT910 Replacement Parts at http://www.etradesupply.com/motorola/android-models/motorola-droid-razr-xt912.html
No comments:
Post a Comment